Chain Hoist

Keeping in mind the ever-evolving requirements of our clients, we are devoted towards manufacturing an optimum quality range of Chain Hoist.

Specifications:

• Designed in two separate independent units - Motor Side (Driving Part) & Mechanism Side (Driven Part).
• Driven by Conical Rotor Motor - Z Start Motor
• Duty: Class II, 40% Intermittent duty
• Tested at 25 % Overload
• Hooks: As per IS: 15560 - 2005
• Load Chain: 8 mm, Grade 80, Alloy Steel Material as per IS: 6216
• Load Chain Wheel: S.G. Iron Casting - Accurately pocketed with proper sitting in the Aluminum Chain Guide.
• Chain Guide: Aluminum - Accurately manufactured with Machine matched recession to provide Load Chain precisely guided movement around the load chain wheel. Designed in two separate halves ensuring ease in assemble/ dismantle or operation stage.
• Gears: Alloy Steel Material, precise machined, gear hobbed & case hardened duly annealed. Spur / Helical combination to provide strength & smooth operation. Gears shall be lubricated with a semi-liquid grease instead of oil, which is less likely to leak, eliminates oil level checks and clings to the gears even after long idle periods.
• Motor: Conical Rotor Motor operating on 415 Volts, 3 Phase, 50 Hz AC Supply with In-built braking mechanism
• Braking Mechanism: Disc type, Spring Loaded acting at any load position.
• Control Panel Unit: Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station).
• Operational Control Station: Suspended from Hoist with a Cable & supporting Wire rope with two push buttons extendable to four / six push button station. Operated with 24 Volts.
• Overload Relay: Provided for protection to Motor
• Limit Switches: Provided to control movement of Hook in Hoisting motion at decided levels activated by Lower Hook & End Stop. Prevents Accidents due to Over-hoisting & Over-lowering.

Features:

• Minimum maintenance
• Excellent functionality
• High operational fluency